Follow us!

Get in touch with us

Item has been added

Get 20% off!arrow_drop_up

How to Remove Contamination Under Window Tint (Mad Gel Test)

  • person Adam, Tint Academy
  • calendar_today
  • comment 0 comments
Adam from Tint Academy and Nick from 519 Tint test Mad Gel by leaving dirt under window tint in Kitchener, Ontario

Dirt left under window tint after a squeegee is one of the most frustrating problems in a tint shop. In this test, Adam from Tint Academy was in Kitchener, Ontario with Nick from 519 Tint, who developed Mad Gel. They put contamination in a window, left it there, and squeegeed the film. Dirt was still under the film. They peeled it back, re-sprayed with Mad Gel, massaged it out — and the contamination was gone. One day after install, they peeled the film back again: not a single speck of contamination.

The 5:25 video below is the full test, including a PPF hood test with baby powder and a look at how well the film tacks. Mad Gel is made in Canada and shipped from Canada. Buy it at mad-gel.com.

Watch on YouTube: We Left Dirt Under the Tint — Mad Gel Carried It Out

What Is Mad Gel?

Mad Gel is an installation gel developed by Nick at 519 Tint in Kitchener, Ontario. Nick said the shop wanted something that worked for them, and it happened to work for paint protection film, security film, and automotive installs. Asked how it is different from other gels, he described a thicker consistency, a floating aspect, and higher tack. It is made in Canada and shipped from Canada.

Adam has tried a ton of gels across Canada and the US — Tint Academy is always shipping gels to try out — and he called this one of the top ones they have seen work. After the test, he also said he had not seen contamination come out that way in any gels on the market. Recommended by Tint Academy — USA, Canada & UK.

Why Installation Gel Matters

Nick's short version is the one installers care about. Most of the time, the gel is used to keep contamination out. It is also used to push out contamination already in the window: peel the film back, spray it, and it comes out. On paint protection film, he said it also helps a lot with the tacking of the edges and in the valleys.

That is why the gel you spray during an install is not a minor accessory. If dirt stays under the film, the job is not finished. If the film will not tack on an edge or in a valley, you are fighting the install instead of finishing it.

The Window Tint Contamination Test

Adam and Nick tested the gel on the car in front of them, first with window tint and then with PPF, so it would not be only their word.

For automotive and exterior window tint, Nick's recommendation is to spray around the edges. That helps keep dirt locked out, and if any contamination gets to the side, you can squeegee it out.

They then put contamination into the window — in the test, baby powder shooting into the glass — and left it there. The film went on, and they squeegeed out the edges like normal and locked the edges. After the squeegee, some dirt was still visible under the film. They noticed it, peeled the film back, re-sprayed with Mad Gel, added a little more water, and slowly massaged it out. The contamination came out. Side by side, the film goes from dirt still in the tint to a crystal-clear window.

1 Day Later: Not a Single Speck

A clean squeegee is only part of the story. One day after installation, they peeled the film back again. There was not a single speck of contamination. The day-of test showed the dirt leaving during the re-spray. The next-day peel-back showed that the glass and film stayed clean after the install had set.

The PPF Hood Test

They ran the same idea on a hood with paint protection film. Nick sprayed the hood down with Mad Gel, then topped it off with a little slip solution. To stand in for contamination missed in the cleaning phase, they put baby powder on the hood, added slip on top, and squeegeed it out like a normal PPF install.

You can see the gel carrying that contamination out. After the squeegee, the PPF is crystal clear — you can see right through it, with no contamination left in the film. They finished by lifting the film off to show how well it tacks.

How to Use Mad Gel

One bottle covers window tint, PPF, and flat glass. You do not need to mix or play around with diluting ratios. Spray the gel, add your slip or a little extra water, and you are good to go. The only difference Nick called out between flat glass, security film, and window tint is water consistency — spray a little extra water when you need more slip.

  • Automotive / exterior window tint: spray only on the edges, so dirt stays locked out and anything that reaches the side can be squeegeed out.
  • PPF: you can spray Mad Gel all across the hood, then top it with slip solution.
  • Contamination already under the film: lift the film as usual, spray a little gel, add a little more water, and slowly massage it out.

Get Mad Gel

Mad Gel is made in Canada and shipped from Canada, including to installers in Canada and the US. The buy link is on the manufacturer's site:

Get Mad Gel at mad-gel.com

For more on why Tint Academy is recommending this gel, see our Tint Gels We Recommend page. That page is also where we will add other gels if and when we recommend them.

Learn Contamination Control in a Tint Academy Class

Contamination control is part of real install work, and it is one of the habits a hands-on class is built around. Tint Academy has trained 7,500+ students over 10+ years and is an official Scorpion Window Film training partner. The courses are 2-day hands-on window tint and PPF certification classes, run in working shops in the USA, Canada, and beyond.

Upcoming window tint and PPF classes on the course list include Calgary and Niagara Falls (November 21–22, 2026); Winnipeg and Montreal (November 28–29); Los Angeles and Singapore (December 5–6); Orlando, Edmonton, and South Carolina (December 12–13); PPF in Toronto (December 17–18); and window tint in Toronto, Las Vegas, and Nashville (December 19–20). January 2027 has tint and PPF dates in Niagara Falls, Dallas, New York, Vancouver, Indianapolis, Toronto, Phoenix/Mesa, Montreal, and Nassau, plus a Manila, Philippines tint listing later in February.

Confirm dates and seats when you book. See the schedule and register at tint.academy, or call or text USA 321-364-9518 or Canada 289-201-2070.

Book your seat at tint.academy

Frequently Asked Questions

How do you remove contamination under window tint?

In this test, dirt was still under the film after the squeegee. Adam and Nick peeled the film back, re-sprayed with Mad Gel, added a little more water, and slowly massaged it out. The contamination came out, and the window was crystal clear.

Where can I buy Mad Gel?

Buy Mad Gel at mad-gel.com. It is recommended by Tint Academy — USA, Canada & UK.