Follow us!

Get in touch with us

Item has been added

Get 20% off!arrow_drop_up

Winter Window Tint Aftercare in Edmonton + Dec 12–13 Class

  • person Tint Academy
  • calendar_today
  • comment 0 comments
Tint Academy graduates with their window tint certificates (past class) – window tint course in Edmonton

Quick answer: In an Edmonton winter, freshly tinted side windows should stay up for longer than they would in summer, often around a week, because cold slows the drying of the water used to install the film. Haze and small water pockets are normal while the film cures. Keep the rear defroster off at first, never force a frozen window down, and only use an ice scraper on the outside of the glass. Below is the aftercare talk we teach new installers to give every winter customer, plus details on our Edmonton window tint course on December 12–13, 2026.

Register for the Edmonton Class: Dec 12–13, 2026

Tint Academy window tint graduates with their certificates (past class) – window tint course in Edmonton

Why Winter Aftercare Matters in Edmonton

Automotive window film is installed wet. A slip solution lets the installer position the film, then most of the water is squeegeed out. The water that stays behind has to evaporate through the film before the adhesive fully bonds to the glass. Heat and sunlight speed that up. Cold, short winter days slow it down.

Film manufacturers say this plainly. Gila's automotive FAQ notes that film fully cures over about a week to 10 days and that "wet, cold weather prolongs it" (Gila Window Film FAQ). XPEL's care guide for its PRIME window tint says haze or moisture bubbles can show for up to ten days, and to wait about 1–5 days before rolling down or cleaning windows, depending on the climate (XPEL film care). Scorpion Window Film, the film we train with, tells customers to leave windows up for two days and that tint can look wet, hazy or lumpy for 7 to 14 days depending on the weather and film (Scorpion Window Film).

In an Edmonton winter, plan for the longer end of those ranges and explain why before the customer drives away.

The Winter Aftercare Talk: 6 Points to Cover at Pickup

When you hand back the keys, walk the customer through these points. Many shops also print them on an aftercare card.

1. Keep the windows up longer in the cold

Rolling a door window down before the film has bonded can catch the top edge on the seal and lift or crease it. That is the most common way fresh tint gets damaged. In winter, give the customer a firm number that matches the film you installed and the weather, and lean toward the longer side. If the manufacturer of your film gives a specific time, use theirs.

2. Do not force a frozen window

Edmonton drivers deal with door glass frozen to the seals. Tell customers to clear ice and let the car warm up before using the windows, even after the cure period. Forcing a window that is stuck in ice can drag the film's top edge against the seal or trap ice chips against it.

3. Leave the rear defroster off at first

Rear window film sits over the defroster lines, and the glass is large, so it often takes longer to dry. Many installers ask customers to keep the rear defroster off for the first several days so heat cycling does not disturb film that is still drying. Tell customers how long you want it off, and remind them that their mirrors and front defrost still work.

4. Ice scrapers go on the outside only

Automotive tint is installed on the inside of the glass, so scraping frost and snow off the outside does not touch the film. What damages tint is scraping or picking at frost on the inside of the glass, or using a scraper or brush near the inside edge. If interior frost or fog builds up, the customer should let the heater clear it, not scrape it.

5. Haze and water pockets are normal during the cure

Explain that light haze, small water pockets and a slightly uneven look are part of curing, and that they can last longer in winter. Customers should not press on bubbles or try to push water out. Debris trapped under the film, an edge that is lifting, or a bubble that grows instead of shrinking after the cure period are different. Those are reasons to come back so you can inspect the job.

6. Wait before cleaning, then clean gently

Ask customers not to clean the inside of the tinted glass until the film has cured. After that, a soft microfiber towel with water or a mild glass cleaner that is safe for window film is enough. XPEL recommends a damp microfiber towel and, if needed, a mild non-ammonia cleaner, and warns against abrasive pads.

What Installers Can Control in the Bay

Good aftercare starts with a good install. In cold weather, that means bringing the vehicle into a heated bay long enough for the glass to warm up, keeping film and slip solution indoors, and squeegeeing out as much water as you can, especially at the bottom edge of door glass. We go deeper on this in our guide to window tint dry time, and our streak and slip-solution cleanup guide covers how to leave the glass clean at handover.

If you are new to tinting in Alberta, also read our earlier Edmonton course guide with Alberta window tint law basics and our Edmonton business licence guide for new tinters.

Edmonton Window Tint Course: December 12–13, 2026

Our Alberta Window Tint Certification is a 2-day, hands-on course for beginners, detailers and automotive professionals. You do not need tinting experience to attend.

  • Dates: Saturday–Sunday, December 12–13, 2026
  • Time: 9:00 AM – 5:00 PM each day
  • Venue: Buff N Bling Auto Spa, 9208 27 Ave NW, Edmonton, AB T6N 1B2
  • Regular tuition: $1,299 CAD
  • Early-Bird: $1,097 CAD full pay while limited Early-Bird pricing lasts. Contact the team before registering to ask for it.
  • Deposit option: $350 today, remaining balance due at class
  • Applicable taxes are additional.

What you learn

Day 1 covers tint fundamentals, prep, roll-down and quarter windows, tint removal, sun strips and business basics. Day 2 covers sedan and hatchback rear windows, trucks and SUVs, a plotter overview, residential film and pricing. See what a 2-day window tint class covers for a full walkthrough.

What is included

  • 2 full days of hands-on training, including practice on real vehicles
  • Professional tint tool kit and a 100 ft roll of ceramic automotive window film to keep
  • Tint Academy certification
  • Online window tint training course
  • Business, pricing and marketing training, plus supplier access
  • Lifetime mentor support, student community, and free future observation/re-attendance for extra practice

Tint Academy has trained 7,500+ students over 10 years across Canada and the USA. To learn more about certification itself, see our window tint certification guide.

Tint Academy window tint class graduates (past class) – window tint course in Edmonton

Watch: How to Stay Busy This Winter as a Window Tinter

Aftercare is one part of winter tinting. Keeping the calendar full is the other. In this webinar replay, Tint Academy covers marketing tint in winter, social ads, mobile tint and PPF work, flat glass as another revenue stream, and building relationships with dealerships and local businesses.

Frequently Asked Questions

How long should I keep my windows up after tinting in winter?

Longer than in summer. Manufacturer guidance ranges from about two days (Scorpion) to 1–5 days depending on climate (XPEL), with full curing taking a week to 10 days or more in cold, wet weather (Gila). In an Edmonton winter, follow your installer's instructions and plan for the longer end.

Why does my new tint look hazy in the cold?

Haze and small water pockets come from installation moisture that has not evaporated yet. Cold slows evaporation, so the haze can last longer in winter. It normally clears as the film cures. Do not press on it.

Can I use my rear defroster after window tint?

Not right away. Many installers ask customers to leave the rear defroster off for the first several days. Ask your installer how long to wait for the film they used.

Can I scrape ice off tinted windows?

Yes, on the outside of the glass. Car tint is installed on the inside, so an exterior scraper does not touch it. Never scrape frost on the inside of tinted glass.

When is the next window tint course in Edmonton?

December 12–13, 2026, 9:00 AM – 5:00 PM both days, at Buff N Bling Auto Spa, 9208 27 Ave NW, Edmonton. Regular tuition is $1,299 CAD, with a $350 deposit option.

Do I need experience to take the Edmonton course?

No. The course teaches the process from the beginning, and you keep your tool kit and film so you can keep practising after class.

Reserve Your Seat in Edmonton

Ready to learn window tinting this winter? Register for the December 12–13 Edmonton class, or contact us first to ask about Early-Bird pricing.

Register for Edmonton: Dec 12–13, 2026

Call or text: 289-201-2070 (Canada)

Prefer another date or city? Browse all Tint Academy training and certification courses.